Product Category
Conveyor Belt water cooling Vulcanizer
Conveyor Belt water cooling Vulcanizer
For more information, please send an email or call our hotline.
Introduction:
KL Series of Electrical water cooling belt Curing Machine own small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 Mpa) of water supply system. It is equipped with light Automatic Electronic Control Box, which is connected with mainframe by integrative plug-in and multi-core cable .It’s reliable and convenient to operate. Presently the devices are widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc.
The device can cool heating plates quickly through water as long as there is ordinary water supply at the scene after vulcanization. It Can greatly improve efficiency and enhance the quality of belt joints, generally cooling from the curing temperature to 60 ℃, 10 minutes, cooling water pressure ≥ 0.2 mpa.
Water cooling belt Curing Machine, of lightweight, can be moved by manpower easily. Please consider the facility of electricity and water before installation. Please put through the water sources with upper and lower heating plate, cooling water pipe by specialized water pipe, but not to discharge water for the time being. Then begin to maintain constant temperature until finish vulcanization, then open water supply at this time instill water into hot plates. When the temperature drops to preset technical value, discharging water and disassembling equipments are allowed, and the vulcanization is finished.
一、 Usage of Vulcanizer
Model KL Conveyor Belt Vulcanizer (vulcanizing press), has the specialities of small volume, light weight, three-phase power supply, homogeneous temperature of electrothemic plae. Well-distributed pressure (1.0-2.0 Mpa) supplied by a hydraulic system, equipped with light control cabinet, connection of the control cabinet and the main equipment done by the integrated plug with the multicore cable, easy maintenance, realible working etc.
It is now used widely for the on-site vulcanization of canvas, nylon, steel cord belt as well as for the connection of rubber belt with special characteristics of anticorrosion and heat resistant under the circumstance of no explosive gas (CH4) or any harmful gas to corrode the metal~ which is accepted by the metallurgical engineering, mineral production, power station~ harbor machinery architectural working or chemical industry etc.
The quality of joint will influence the working efficiency of the conveyor belt or the life service directly, especially for the long distance and high-strength conveyer. Therefore, model LYLHJ vulcanizer is the necessary accessory for the belt conveyer equipment.
二、 Technical Data
1. Pressure of vul: 1.5MPa
2. Temp. of vul: 145℃
3. Supface temp. diff. of vul.Plate: ±3℃
4.Warm up time: < 30min (normal temp. up to 145℃)
5.Voltage: 380V 50HZ 3 Phases
6.Output power of control cabinet: 9.8--38.9 KW
7.Temp. adjusting range: 0～200℃
8. Time. adjusting range: 0～99 min
9. After pressure the top and down Heating Plates in 0.8 MPa, the gap between the Plate is no more than 0.4mm
| Model | Width of Vulcanized Belt (㎜) |
Spexification | Size of heating plate （L×W）mm | Power KW | cross beam size (L×W×H)mm |
Dinemsion (L×W×H)mm |
Weight ㎏ |
configuration | |
| manual pump |
control cabinet | ||||||||
|
KL-650 |
650 | 650×830 | 830×820 | 9.8 | 1080×165×170 | 1322×830×585 | 440 | 1 | 1 |
| 650×1000 | 1000×820 | 11.8 | 1384×1000×585 | 530 | 1 | 1 | |||
|
KL-800 |
800 | 800×830 | 830×995 | 11.97 | 1250×165×170 | 1492×830×585 | 515 | 1 | 1 |
| 800×1000 | 1000×995 | 14.4 | 1554×1000×585 | 630 | 1 | 1 | |||
|
KL-1000 |
1000 | 1000×830 | 830×1228 | 14.7 | 1450×165×170 | 1692×830×585 | 600 | 1 | 1 |
| 1000×1000 | 1000×1228 | 17.8 | 1754×1000×585 | 715 | 1 | 1 | |||
|
KL-1200 |
1200 | 1200×830 | 830×1431 | 17.2 | 1680×165×200 | 1922×830×750 | 810 | 1 | 1 |
| 1200×1000 | 1000×1431 | 20.7 | 1984×1000×750 | 920 | 1 | 1 | |||
|
KL-1400 |
1400 | 1400×830 | 830×1653 | 19.8 | 1900×165×250 | 2142×830×750 | 890 | 1 | 1 |
| 1400×1000 | 1000×1653 | 23.8 | 2204×1000×750 | 1060 | 1 | 1 | |||
|
KL-1600 |
1600 | 1600×830 | 830×1867 | 22.3 | 2140×165×270 | 2382×830×795 | 1150 | 1 | 1 |
| 1600×1000 | 1000×1867 | 27 | 2444×1000×795 | 1340 | 1 | 1 | |||
|
KL-1800 |
1800 | 1800×830 | 830×2079 | 24.9 | 2350×165×320 | 2592×830×900 | 1430 | 1 | 1 |
| 1800×1000 | 1000×2079 | 30 | 2654×1000×900 | 1630 | 1 | 1 | |||
|
KL-2000 |
2000 | 2000×830 | 830×2303 | 27.6 | 2550×165×320 | 2792×830×980 | 1560 | 1 | 1 |
| 2000×1000 | 1000×2303 | 33.2 | 2854×1000×980 | 1830 | 1 | 1 | |||
|
KL-2200 |
2200 | 2200×830 | 830×2478 | 29.7 | 2750×165×360 | 2992×830×980 | 1720 | 1 | 1 |
| 2200×1000 | 1000×2478 | 35.8 | 3054×1000×980 | 2030 | 1 | 1 | |||
|
KL-2400 |
2400 | 2400×830 | 830×2678 | 31.8 | 2940×165×360 | 3192×830×980 | 1880 | 1 | 1 |
| 2400×1000 | 1000×2678 | 38.9 | 3254×1000×980 | 2250 | 1 | 1 | |||
RELATED PRODUCTS
Explore Our Product Lineup
Ask For Quote Now !
Thank you for your interest in Kaili Rubber, please leave us a message or call us.
Contact information
Add：Hongchou industry zone tiantai county zhejiang province China.
Tel：+86-576-83010521
Fax：+86-576-83010520
E-mail：seller@kailirubber.com
Add：Hongchou industry zone tiantai county zhejiang province China.
Tel：+86-576-83010521
Fax：+86-576-83010520
E-mail：seller@kailirubber.com
Copyright © 2021 ZheJiang Kaili Rubber Co.,Ltd. All rights reserved. Powered by www.300.cn 浙ICP备11037139号
