Heat resistant conveyor belt
Heat resistant conveyor belt
For more information, please send an email or call our hotline.
The carcass of this product has very high adhesion after the special treatment of coating and shaping. Under normal working temperature of below 180°C, the belt is low in elongation, excellent in anti-abrasion, and can bear 250C high temperature for a short time. The belt is suitable for use in cement, metallurgy and steel industry.
Cover Rubber technical data standard: DIN22102
| Grade | Working Temperature | Raw Material |
Tensile strength (MPA) |
Abrasion loss (mm3) |
Elongation % |
Hardness (°Sh) |
| T1 | +100°C short time 125°C | SBR | 15 | 200 | 350 | 60±5 |
| T2 | +125°C short time 150°C | SBR | 15 | 200 | 350 | 60±5 |
| T3 | +150°C short time 180°C | EPDM | 15 | 200 | 400 | 60±5 |
| T4 | +180°C short time 250°C | EPDM | 15 | 200 | 400 | 60±5 |
For examples: EP630/4 Width 1000mm x 4plies 5+2mm, Length 200m, grade T3, Mould edge
| 1.Width and length : | 1000mm and 200m | |||||
| 2.The belt whole Tensile Strength (Carcass) : | 630N/mm | |||||
| 3.Numbers of fabric (Carcass): | 4 | |||||
| 4.Top cover rubber thickness S2: | 5 | |||||
| 5.Bottom cover rubber thickness S3: | 2 | |||||
| 6. Cover rubber quality grade: | T3 Heat resistant 150°C | |||||
| 7. Mould edge or Cutting edge : | Mould edge | |||||
The standard fabric type: ( It can be customized according to the customer's requirements )
| The belt whole Tensile Strength (KN/m) |
||||||
| EP250/2 | EP315/3 | |||||
| 400 | EP400/2 | EP400/3 | EP400/4 | |||
| 500 | EP500/3 | EP500/4 | EP500/5 | |||
| 630 | EP630/3 | EP630/4 | EP630/5 | |||
| 800 | EP800/4 | EP800/5 | EP800/6 | |||
| 1000 | EP1000/4 | EP1000/5 | EP1000/6 | |||
| 1250 | EP1250/4 | EP1250/5 | EP1250/6 | |||
| 1600 | EP1600/4 | EP1600/5 | EP1600/6 | |||
| 2000 | EP2000/4 | EP2000/5 | EP2000/6 | |||
| 2500 | EP2500/5 | EP2500/6 | ||||
| 3000 | EP3000/5 | EP3000/6 | ||||
The standard top + bottom cover rubber thickness: ( It can be customized according to the customer's requirements )
| Top+Bottom rubber thickness (mm) | 0+0, 3+0, 2+1.5, 3+1.5, 3+2, 4+2, 5+2, 6+2, 6+3, 8+3, 10+3, 12+3, ….. 3/16+1/16, 1/4+1/16 …. |
||
| Top+Bottom rubber thickness (inch) | |||
RELATED PRODUCTS
Explore Our Product Lineup
Ask For Quote Now !
Thank you for your interest in Kaili Rubber, please leave us a message or call us.
Add：Hongchou industry zone tiantai county zhejiang province China.
Tel：+86-576-83010521
Fax：+86-576-83010520
E-mail：seller@kailirubber.com
Add：Hongchou industry zone tiantai county zhejiang province China.
Tel：+86-576-83010521
Fax：+86-576-83010520
E-mail：seller@kailirubber.com
Copyright © 2021 ZheJiang Kaili Rubber Co.,Ltd. All rights reserved. Powered by www.300.cn 浙ICP备11037139号
